RM Solar S Class 20 Manuál s instrukcemi Strana 55

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 68
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 54
55 56
9. Expansion vessel
(also known as expansion tank or pressure vessel)
9.1 Function of the Expansion Vessel
An expansion vessel protects the solar system during pressure changes and
temperatures uctuations.
For example, in very hot conditions when energy is not being drawn off, the system
may overheat causing the glycol to expand.
9.2 Technical information:
Maximum pressure: 10 bar
Working pressure: 3.0 – 4.0 bar (20°C)
Gas pressure: 2.5 bar
Maximum working temperature: 130°C
Membrane: Nytril (butyl) rubber
Resistance: 40 % glycol
9.3 Expansion vessel sizing:
It is of critical importance to have the correct size of expansion vessel in your solar
system. The volume of the expansion vessel is determined by the number of RM
Solar solar panels connected within the one
solar heating system. For one collector 6 Litres of the expansion vessel volume is
required. Please use the right size expansion vessel, and we set out a table below to
help you chose the correct size:
Number Of Collectors Expansion Vessel Size
2 18
3 18
3+ Please call for details
9.4 Location:
The pressure vessel should be located in a position where it can be easily accessed.
It should be tted with isolating valve for ease of replacement. The isolating valve
should not be accessible without a tool so that an unqualied person cannot shut it
off. The expansion vessel should be tted on the return run of the system.
9.5 Maintenance:
Once an expansion vessel is pressurised correctly it does not require maintenance
although we strongly recommend a visual inspection by a qualied person at least
once a year. Monthly checking of the pressure gauge on the double pump station is
also very important. A pressure drop might indicate:
A leak on the pipes connections or
A leak on the panels connections or
A faulty expansion vessel
In the case of any unexpected changes, the customer must contact the installer
immediately and the installer should inform the customer of this when explaining the
system.
Zobrazit stránku 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Komentáře k této Příručce

Žádné komentáře