RM Solar S Class 20 Pro Manuál s instrukcemi stáhnout pdf (Strana 23)

Section 3 - Slate Bolt Installation

Drill the holes on each marked position with a high quality 25mm masonry bit. Make sure the drill

does not spin too fast or you may break the tile / slate. Do not penetrate beyond the tile / slate. After

drilling the holes into the slates, use an 8mm wood bit to make a hole through the rafters at each

position. Bolt the bottom part of the slate bolt into each hole. Note: The angle between rafter and

drill bit must be 90

90°

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 87 88

Žádné komentáře

RM Solar S Class 20 Pro Manuál s instrukcemi Strana 23